Donnerstag, 3. Februar 2022

Piep, Piep!

 
Hallo Ihr Lieben!
Heute habe ich eine weitere frühlingshafte Karte im Gepäck, die ich auf dem Stampcorner Blog zeige. Und auch, wenn sie ohne Rosa und fast ohne Rot auskommt, wäre es auch eine tolle Karte für den Valentinstag. 

Hello everyone!
Today I'm sharing another spring-ish card over at the Stampcorner Blog. And even if I didn't use any pink and just a hint of red, this card would also make a great Valentine's Card.

Für den Hintergrund meiner Karte habe ich meine Alcohol Inks mal wieder ausgepackt und eine Technik von Jennifer McGuire ausprobiert. Dabei wird Alcohol Ink mit Blending Solution auf Yupo getropft, dann wird ein weiteres Stück Yupo darübergelegt und beide zusammengepresst. Je nachdem, wie oft man den Vorgang wiederholt, entstehen unterschiedliche Effekte. Ich habe hier die Alcohol Ink Farben Aqua und Turquoise und viel Blending Solution verwendet, da ich einen zart-blauen Hintergrund wollte. 
Die Herzen darauf habe ich dann mit Lift Ink Technik gemacht. Ich habe etwas von der Lift Ink Tinte auf ein Stück Filz gegeben und sie dann durch die Lots of Hearts Background Stencil von LawnFawn gedrückt. Zuerst hatte ich das mit dem Lift Ink Kissen versucht, das gab aber nicht so einen tollen Effekt. Also habe ich ein paar Tropfen des Lift Ink Reinkers auf das Schwämmchen aufgetragen, und damit klappte es super! Nach dem Wegtupfen/-wischen der Lift Ink Tinte, waren die Herzen wunderbar erkennbar! Natürlich nicht so gut, wie mit farbiger Tinte, aber das ist eben der Effekt der Lift Ink Tinte, und genau so ein subtiles Muster wollte ich Hintergrund. 

For the background of my card I brought out my Alcohol Inks and tried a technique by Jennifer McGuire. She's putting Blending Solution and Alcohol Inks onto a piece of Yupor, then puts another piece of Yupo on top and presses them together. Depending on how often you repeat this step, you end up with different patterns and intensities. I used the alcohol ink colors Aqua and Turquoise here and lots of Blending Solution since I was after a light and dreamy background. 
To add the hearts to my Yupo I did the Lift Ink technique. I've put some of the Lift Ink onto one of the felt blending pads and then put it through the Lots of Hearts Background Stencil by LawnFawn. First I took the Lift Ink from the Lift Ink pad, but that didn't work too well. So I've put a few drops from the Lift Ink Reinker onto the felt and that worked like a charm! After dabbing/wiping the Lift Ink away, the hearts were perfectly visible. Of course not as crisp as if using colored ink, but that's how the Lift Ink works and that's exactly the subtle pattern I was after.


Für das Motiv habe ich den Wellensittich aus dem Oops Stempelset aus dem Januar-Release benutzt. Allerdings ist es bei mir kein Wellensittich, sondern ich habe ihn eher wie eine Mischung aus Rotkehlchen und Rotschwanz coloriert. Wellensittiche sitzen doch eher selten in Nestern im Garten. Aber genau das hatte ich vor.  Ich habe den Vogel mit Copics coloriert und ein paar Details mit einem weißen Gelpen hinzugefügt.
Für das Nest habe ich die Tasse aus dem Lovely Latte Stanzenset von LawnFawn benutzt! Ich habe die gefüllte Tasse zweimal aus braunem Cardstock gestanzt, dann jeweils die Henkel sowie einen Teil der Rundung unten weggeschnitten. Bei einem der Teile habe ich außerdem die obere Kante in die andere Richtung gerundet. Das geht ganz einfach mit Hilfe der schmalen Ovalstanze aus dem Set. Dann habe ich das vordere Teil mit dem Intertwine 3D-Embossingfolder von Sizzix geprägt. Damit das Muster besser rauskommt, habe ich diesen Teil des Nestes mit Distress Oxide Gathered Twigs gewischt, den hinteren Teil habe ich mit Ground Espresso abgedunkelt. Dann habe ich beide Teile mit 3D Tape aufeinander geklebt. 
 Auch für den Ast, auf dem das Nest steht, habe ich etwas um die Ecke gedacht - es ist eigentlich ein Baum aus dem Slimline Meadow Stanzenset von WhimsyStamps! Ich habe ihn aus dem dunkelbraunen Woodgrain Cardstock von LawnFawn gestanzt und mit einem weißen Stempelkissen die Details ein wenig hervorgehoben. Den hinteren Ast habe ich per Hand abgeschnitten und etwas nach rechts versetzt hinten gegen das Nest geklebt. Der andere Teil des Astes ist vorne auf das Nest geklebt. 
Dann habe ich den Vogel ins Nest gesetzt und einige der kraftfarbenen geshredderten Papierstreifen hinter den vorderen Teil des Nestes geklebt, dass sie in alle Richtungen wegstehen. 
Ich habe den Vogel samt Nest und Ast auf den Hintergrund geklebt. Über das Motiv kam der Text, der ebenfalls aus dem Oops Stempelset ist. Ich habe ihn mit schwarzer Tinte auf braunen Cardstock gestempelt und aufgeklebt. 
Zwischen Text und Motiv habe ich noch drei Herzen, gestanzt aus rotem Cardstock mit den Herzenstanzen aus dem Hearts and Stars Skinny Tag Stanzenset von LawnFawn, aufgeklebt.

For the image I used the budgie stamp from the Oops stamp set from Stampcorner's january release. But I changed him while coloring, now he looks more like a garden bird. Budgies hardly ever sit in a nest in a tree in the garden. But that's exactly what I had in mind. I colored him with Copics and added a few details with a white gel pen.
For the nest I used the cup from the Lovely Latte die set by LawnFawn! I've die cut the solid cup twice from brown cardstock, then cut off the handle and also some of the rounded bottom from both pieces. I used the skinny oval die from the set to turn the rounding at the top inwards, then used the Intertwine 3D embossing folder by Sizzix to add some texture to this piece. To make the pattern even better visible, I applied some Distress Oxide Gathered Twigs. And I used Ground Espresso on the back piece to darken it up even more. Then I glued both pieces together with dimensionals. 
Also for the branch, on which the nest is standing, I did some thinkingn outside the box. Originally it's a tree from the Slimline Meadow die set by WhimsyStamps. I've die cut it from a piece of the dark brown woodgrain cardstock by LawnFawn and swiped a white ink pad over the branch/tree, to bring out the pattern a bit more. I've cut off the two top branches and glued them behind the nest, moving them a bit further to the right. The other part of the branch is glued to the front of the nest. 
Then I sat the bird into the nest and added a few pieces of these craft colored shredded paper strips behind the top part of the nest, making sure, they stick out into different directions.
I glued the bird with the nest and branch onto the background. Above the image I added a text, that means "peep, peep, I love you" - which rhymes in german. I stamped the text with black ink onto a strip of brown cardstock and glued it down. 
Between the image and text I added three hearts, die cut from red cardstock with the heart dies from the Hearts and Stars Skinny Tag die set by LawnFawn. 


Und weil der Vogel so nur vor blauem Hintergrund ein wenig verloren aussah, habe ich noch einen Blätterrahmen hinzugefügt. Der bringt dann auch den frühlingshaften Touch auf die Karte.
Ich habe die Lots of Leaves Cover-Up Stanze von MFT aus hellgrünem Cardstock gestanzt, dann habe ich ihn vom Rand her mit Distress Oxide Mowed Lawn und Rustic Wilderness abgedunkelt. 
Und auch ein paar Spritzer durften nicht fehlen. Hier habe ich goldene Schimmer-Watercolor und weiße Acrylfarbe aufgespritzt.
Dann habe ich den Rahmen mit 3D Tape auf den Hintergrund und alles auf einen weißen Kartenrohling geklebt. 

And since the bird looked a bit lost in his nest with just the blue background, I added a leafy frame. This also adds the spring-ish touch to the card.
I've die cut the Lots of Leaves Cover-Up die by MFT from light green cardstock, then darkened it up from the outside with Distress Oxide Mowed Lawn and Rustic Wilderness.
And of course I also had to add a few splatters. Here I did them with some golden metallic watercolor and some white acrylic paint. 
Then I glued the frame onto the background using foam tape and glued everything onto a white note card.