Dienstag, 21. Dezember 2021

Together...

 
Hallo Ihr Lieben!
Nur noch wenige Tage bis Weihnachten - nicht nur wir Menschen sind mit den letzten Festvorbereitungen beschäftigt - auch die Pinguine schmücken ihren Baum. Und das kann, wie man auf der Karte, die ich heute auf dem Stamping-Fairies Blog zeige, sieht, eine ganz schön wackelige Angelegenheit sein! Aber ich bin mir sicher, zusammen schaffen die das! 

Hello everyone!
Only a few days left until christmas - and not only we humans are busy with the last preparations, also the penguins are decorating their tree. And, as you can see on this card, that I'm sharing over at the Stamping-Fairies Blog today, that can get pretty shaky! But I'm sure, they'll get it done together!

Eigentlich war das interaktive Element hier gar nicht geplant. Aber als ich dann alle Teile coloriert und ausgeschnitten vor mir hatte, fand ich die Idee doch ganz gut - und habe sie eingebaut.

I hadn't planned to make an interactive card. But when I had all the images colored and cut out in front of me I liked the idea a lot - and so I included the interactive element.


Hier habe ich zuerst für den Hintergrund etwa das untere Drittel meines weißen Cardstocks abgedeckt und den Himmel mit Distress Oxide Blueprint Sketch, Chipped Sapphire und Black Soot gewischt. In diesem oberen Bereich habe ich kleine Wassertropfen sowie kleine Spritzer goldener Metallic Watercolor verteilt.
Anschließend habe ich den oberen Bereich abgedeckt und unten das Wasser mit Distress Oxide Salty Ocean aufgewischt.
Die Texte hier sind eine Kombination zweier Stempel: Der Text being together makes everything better ist aus dem Stempelset Better Together. Ich habe beim Abstempeln das Wort everything abgedeckt und anschließend das Wort christmas aus dem Stempelset Dino-Mite Christmas in die so entstandene Lücke gestempelt. Anschließend habe ich die Worte mit weißem Embossingpulver bestreut und embosst. Dann habe ich den Text zerschnitten und auf meine Karte geklebt.

Here I covered the lower third of my white cardstdock with some copy paper and created my sky with Distress Oxide Blueprint Sketch, Chipped Sapphire and Black Soot. I spritzed some water and also some golden metallic watercolor over that sky area.
Then I covered the sky I've inked up before and created the water in the lower third using Distress Oxide Salty Ocean.
The sentiment here is a mix of two stamps: I stamped the being together makes everything better text from the Better Together stamp set onto some black cardstock, masking the word everything off. Into the gap that was left between the words makes and better I stamped the word christmas from the Dino-Mite Christmas stamp set. I put some white embossing powder over my text and heat embossed it. Then I cut the text into two strips and glued those onto my card.


Die meisten Motive hier sind aus dem No One Stacks Up to You Stempelset: die Eisschollen, die Pinguin und der Hocker, auf dem sie stehen.
Die Eisschollen habe ich mit ganz heller Tinte gestempelt, so dass man später die gestempelten Linien nicht mehr sieht. Dadurch wirken die Eisschollen echter. Außerdem habe ich hier Reflektionen von den Objekten darüber mit aufgemalt.
Der Tannenbaum ist mit der Evergreen Stanze von MFT gemacht. Ich habe ihn aus grünem Cardstock gestanzt und dann mit Copics schattiert. Eigentlich wollte ich ihn undekoriert lassen, aber das fand ich ein wenig zu traurig für einen Weihnachtsbaum. Deswegen habe ich die Fische aus dem Stempelset Beary Best Friends abgestempelt, mit Copics coloriert und ausgeschnitten. Dann habe ich sie an den Christbaum gehängt. Pinguine haben bestimmt Fische an ihrem Weihnachtsbaum - und die Schuppen glitzern auch noch so toll passend! Die Girlande habe ich mit einem goldenen Gelpen aufgemalt. 
Und der Stern, den der oberste Pinguin versucht, auf die Baumspitze zu stecken, ist aus dem Stempelset Holiday Penguins.
Coloriert sind alle Motive auf der Karte mit Copics.
Und dann kam das interaktive Element ins Spiel. Ich wollte vermeiden, dass meine Pinguin-Pyramide rechts die Karte hinunter rutscht. Deswegen habe ich kein rundes Loch in die Karte geschnitten. Stattdessen habe ich einen der Frosty Ice Cubes von MFT genommen, die Umrisse unter dem Hocker auf die Karte gemalt und dann etwas größer ein Quadrat in den Hintergrund geschnitten. Eine Seite des Eiswürfels habe ich auf einen kleinen Kreis aus Cardstock geklebt, auf der anderen Seite ist das Motiv befestigt. So kann die Pyramide nur soweit schwanken, bis die Ecken des kleinen Eiswürfels an den Seiten des quadratischen Lochs anstoßen. 
Damit die Eisscholle auch schön ins Wasser taucht, habe ich über den unteren Bereich meiner Karte noch etwas hellblaues Vellum gelegt. Zum Befestigen habe ich die Enden seitlich um den Kartenrand geklebt. Auf das Vellum und auch das gewischte Wasser habe ich mit einem weißen Gelpen ein paar Wellen ins Wasser gemalt.
Damit sich meine Pinguine frei bewegen können - oder in diesem Fall eher müssen? - habe ich die schwarze Mattung mit Foam Tape aufgeklebt, anschließend habe ich alles auf einen weißen Kartenrohling geklebt.

Most images on this card are from the No One Stacks up to You stamp set: the ice floes, the penguins and the little stool they are standing on.
I used a very light ink to stamp the ice floes so you don't see the stamped lines anymore after the coloring. This way they look more realistic. And I also added a few reflections from the object that are standing on them.
The tree is die cut with the Evergreen die by MFT. I've die cut it from green cardstock and added some shading with my Copics. I had planned to leave it undecorated but then decided, that would be pretty sad for a christmas tree. So I used the fish from the Beary Best Friend stamp set, colored them with Copics and hung them into the tree. I'm sure penguins decorate their trees with fish - also because their scales glitter so wonderfully! To add the garland I made little dots with a golden gel pen.
And the star, that the penguin on top of the pyramide, is trying to put on top of the tree is from the Holiday Penguins stap set.
All images on this card are colored with Copics.
And then I added the interactive element. I didn't want my penguin pyramide tumble over the right edge of my card. So I didn't cut a circle into the background. Instead I used one of the Frosty Ice Cubes by MFT, traced the outer shape onto my cardstock and then it out slightly larger with my scissors. I attached a little circle to one side of the ice cube, put it through the hole and glued the image onto the other side of the ice cube. Now the penguin pyramide can only move until the corner of the ice cube touches the outline of my square cut out.
To make the ice floe with the penguins dip into the water I added a layer of light blue vellum to part of my water area at the bottom of my card. To glue it down I folded the ends over the side edges of my cardstock and glued them down onto the back of it. Onto the vellum and also the inked water area I added a few tiny waves and water ripples with a white gel pen.
To let my penguins move freely I used foam tape to attach the black matting to my scene, then glued everything onto a white note card.