Sonntag, 7. Juli 2019

Eine Karte für eine Challenge


 Hallo Ihr Lieben!
Ich habe ja schon ewig an keiner Challenge mehr teilgenommen. Aber als ich den neuen Sketch auf dem MFT Blog gesehen habe, hatte ich sofort ein Bild einer fertigen Karte im Kopf. Und passenderweise kam auch da gerade mein Card Kit bei mir an... Manchmal passt es eben! Und so ist diese Karte entstanden.

Hello everyone!
I haven't joined a challenge in quite some time. But when I saw the new sketch over at the MFT Blog I immediately had a vision of a card in mind. And just that day also my Card Kit arrived... There are days when everything works out. And so I made this card.

Ich habe mich recht genau an den Sketch gehalten und ihn nur um 90° gedreht. Eher selten bei mir, aber hier war es einfach so, dass alles gepasst hat. 
Ich habe einen Streifen des grünen Cardstocks schwarz gemattet und senkrecht auf eine weiße Grundkarte geklebt. Die habe ich vorher mit türkisfarbenen Sprenkeln bespritzt. Dafür habe ich die Color Bursts aus dem Kit benutzt.

I followed the sketch pretty close and only turned it sideways. That doesn't happen with me very often but here just everything fit.
I've matted a strip of green cardstock black and glued it onto a white card base. Before glueing the strip down I've sprinkled the white card with some turquoise color and used the Color Bursts from the kit for it.


Den Flowers in Bloom Stempel finde ich grandios. Er ist von der Höhe her eher auf hochkantige Karten ausgelegt, aber ich habe mich überwunden und einfach oben und unten etwas vom Motiv weggeschnitten. Sieht trotzdem gut aus, finde ich.
Die Blumen sind ebenfalls mit den Color Bursts coloriert. Zuvor habe ich sie weiß auf Aquarellcardstock embosst und mit der passenden Stanze, die ich mir so wohl nicht gekauft hätte, die aber im Set enthalten war, ausgestanzt. Mich störte es, dass der innere Teil zwischen den beiden untere Blumen nicht mit ausgestanzt wurde, also habe ich hier mit der Schere nachgeholfen. Ich hatte die Farbkraft der Pigmente der Color Bursts ein wenig unterschätzt, so dass die Blumen intensiver geworden sind, als ich geplant hatte. Aber so poppen sie zumindest richtig aus der Karte heraus. Nach dem Trocknen habe ich sie mit 3D Tape auf den grünen Cardstockstreifen aufgeklebt.
Die drei helltürkisfarbenen Kreise unter dem Streifen sind übrigens auch aus mit den Color Bursts leicht eingefärbtem Cardstock gestanzt. So passte alles farblich auf jeden Fall zusammen.

I just love this Flower in Blooms stamp. I would fit onto the full length of a card just fine, but since I've turned the sketch the image was too large. I dared to cut off a bit from both the top and the bottom of the image and I think it still looks good.
The flower were also colored in useing the Color Bursts. Before coloring them I've white heat embossed them onto some watercolor cardstock and cut out using the matching die. I probably wouldn't have bought it (I just love fuzzy cutting my images) but since it was included in the set of course I used it. There was a piece of white cardstock left between those two lower flowers that really disturbed me so I used my scissors to cut this away. I also didn't think of the pigments of the Color Bursts to be so intense so my flowers turned out darker than I had planned. But now at least they pop out. After letting the image dry I've used dimensionals to glue it onto the green cardstock.
Those three light turquoise circles on my card/under the green strip are also made from watercolor cardstock that I've lightly covered with those Color Bursts. This way I made sure everything goes together perfectly.


Fehlte noch ein Text. Bei den Blumen sind tolle Textstempel dabei, aber ich wollte kein Banner auf meine Karte kleben. Also habe ich zur Sweet Hello Stanze gegriffen (die ist einer meiner neuen Favorits) und das Wort aus dunkel- und helltürkisfarbenem Cardstock gestanzt. Der dunkle Cardstock war, zusammen mit anderen Farben, ebenfalls im Kit enthalten. Es ist mein erster Cardstock von MFT und ich bin von der Qualität hin und weg. Mal sehen, ob man die hier auch bekommt. Die beiden Worte habe ich leicht seitlich versetzt aufeinander geklebt und dann auf die Karte gesetzt. Zum Schluss kam dann noch ein paar schwarze Enamel Accents dazu.

Now all I was missing was a saying. There are some great words coming in the Flowers in Bloom Set but I didn't want to add a banner to my card. So I've used the Sweet Hello die - which is one of my new favorite dies - and cut the word from both dark and light turquoise cardstock. The darker tone also came in the kit, together with some more colors. It's the first time I've touched their cardstock and I am just loving the quality. Need to check if I can get that in a greman shop. I've glued the two words on top of each other slightly off and then onto the card. 
In the end I've only added a few black Enamel Accents.